What is the Way to Cool the Steel Structure Factory?

Choosing the right method to cool the steel structure workshop is a comprehensive problem. To solve the problem, it is necessary to find the right medicine. First, we must find the key factors affecting the temperature of the steel structure workshop, focusing on its governance, and the method is targeted to other relatively minor factors. Handling to achieve a good indoor environment and its higher cost performance.

 

1. Steel structure plant ventilation cooling

Since some machines in the steel structure produce heat and water vapor, if they are not discharged in time, they will accumulate in the plant, which will increase the temperature of the steel structure plant and affect the environment of the steel structure plant. The solution to these problems is to ensure proper ventilation of the plant and install an appropriate ventilation system. Reasonable installation of the exhaust system will significantly improve the air environment of the steel structure plant and greatly reduce the temperature of the steel structure.

Install roof forced exhaust fan, the power fan is a kind of ventilation device driven by electric power. It has a good exhaust effect and can adapt to the ventilation of any environment. The unpowered ventilator is a kind of ventilation device that relies on the principle of air convection. When there is a difference between indoor and outdoor air environment, air flow will be generated to eliminate indoor exhaust gas and hot air. The advantage is that it does not require additional power and is more environmentally friendly. However, it is highly dependent on the environment and cannot be forced to exhaust. The main products are turbine ventilators, strip ventilators (lighting belt ventilation), roof ventilators and so on. Install roofless power ventilators. The unpowered ventilator is a kind of ventilation device that relies on the principle of air convection. When there is a difference between indoor and outdoor air environment, air flow will be generated to eliminate indoor exhaust gas and hot air. The advantage is that it does not require additional power and is more environmentally friendly. However, it is highly dependent on the environment and cannot be forced to exhaust. The main products are turbine ventilators, strip ventilators (lighting belt ventilation), roof ventilators and so on.

 

2. Steel structure factory forced cooling

Forced cooling refers to the installation of a cooling fan on the surface of the factory. The cooling fan uses the principle of water cooling to cool the air, and the strong exhaust fan delivers the cold air to the indoor machine. It can keep the indoor temperature of the steel structure plant at a comfortable temperature of 26-30 °C. Its power consumption is equivalent to 1/8 of the air conditioner. The cost is 1/2 of the air conditioner, which is a good way to force the plant to cool down.

 

3. Steel structure plant insulation and cooling

Steel structure plant insulation can isolate most of the solar radiation and conduction heat, reducing indoor greenhouse effect. Thereby greatly reducing the temperature of the plant and improving the environment of the steel structure plant. The commonly used methods now have the following two options: The insulation of the steel structure factory is covered with insulation cotton. The insulation cotton used on the roof is glass wool. The thickness is usually 50mm, 75mm, 100mm and the density is 64kg/m3. The indoor temperature is reduced by 5-8 °C, and the construction process is complicated. If the old factory is to be insulated, the original roof should be removed, the steel mesh should be pulled, the glass wool should be laid on the steel wire, the original roof panel should be covered, and the waterproof treatment should be done.